Mounting options - Alcons Audio

BRKTS7

beheerder — Wed, 03 Jun 2015 15:04:14 +0000

The BRKTS7 is a swivel yoke for a single TS7 monitor. The yoke is connected to the cabinet with two two M8 bolts to the underside of the cabinet.
The bracket can be fitted with an optional truss clamp, TV-spigot or STMT stand-mount adapter, with M10 (2) or M12 (1) bolt/nut connection.
The BRKTS7 is certified for a safety-rating of 10:1, for one cabinet TS7. It is also possible to mount the bracket to the TS3.

The post BRKTS7 appeared first on Alcons Audio.

BRKQR18

beheerder — Wed, 08 Apr 2015 07:19:00 +0000

The BRKQR18 is a swivel yoke for a single QR18 line-source column. The yoke is connected to the cabinet with two short steel strips on the side of the cabinet, secured with two M10 bolts each.
The bracket can be fitted with an optional truss clamp, TV-spigot, or STMT stand-mount adapter, with M10 bolt/nut combinations.
The BRKQR18 is certified for a safety rating of 10:1, for one cabinet QR18.

The post BRKQR18 appeared first on Alcons Audio.

BRKQR36

beheerder — Wed, 08 Apr 2015 07:20:40 +0000

The BRKQR36 is a swivel yoke for a single QR36 line-source column. The yoke is connected to the cabinet with two short steel strips on the side of the cabinet, secured with two M10 bolts each.
The bracket can be fitted with an optional truss clamp, TV-spigot or STMT stand-mount adapter, with M10 bolt/nut combinations.
The BRKQR36 is certified for a safety-rating of 10:1, for one cabinet QR36.

The post BRKQR36 appeared first on Alcons Audio.

QR36HSTBR

beheerder — Wed, 08 Apr 2015 07:44:49 +0000

The QR36HSTBR is a hoist bar for flying arrays of QR18, QR36, QM18 and QM36. The bar is connected to the top cabinet with four 0.75T shackles, 2 on each side of the cabinet.
The bar has two (2) 12mm/0,47-in holes to facilitate a (up to) 1T shackle and one (1) 26mm/1-in top hole to facilitate a (up to) 6.5T shackle.

The post QR36HSTBR appeared first on Alcons Audio.

GRD16

beheerder — Wed, 08 Apr 2015 07:39:27 +0000

The GRD16 enables the LR16 line-array modules and the LR16B line-array bass modules to be flown and ground stacked. The grid can be suspended from the central “single pick-point” bar (ø 26mm / 1-in. (6,5T)), as well as multiple mounting points (4) on the top of the grid (ø 26mm / 1-in. (6,5T)). Comes with four detachable castor wheels and all quick release pins required (attached to the frame).

The GRD16 has a weight of 28 kg / 61.7 lb and is certified for a safety-rating of 10:1, for fifteen (15) cabinets LR16, or eight (8) cabinets LR16B on the central bar; And for eighteen (18) cabinets LR16, or ten (10) cabinets LR16B on the flying-eyes on top of the grid.

The post GRD16 appeared first on Alcons Audio.

BRKCSS3

beheerder — Thu, 02 Jul 2015 06:55:37 +0000

The BRKCSS3 is a swivel yoke for a single CSS3 or CCS6 surround. The yoke is connected to the cabinet on the left and right side with one M8 bolt each.

The bracket is designed for wall-mount only, and is to be mounted through the two slot holes.

The post BRKCSS3 appeared first on Alcons Audio.

BRKCRMSC-SRHOR

Tom Back — Thu, 06 Oct 2016 13:11:01 +0000

The BRKCRMSC-SRHOR is a swivel yoke for a single CRMSC-SRHOR surround. The yoke is connected to the cabinet on the left and right side with one M6 bolt each.

The bracket is designed for wall-or ceiling mount, and is to be mounted through the two slot holes; It is also prepared for STMT (stand) mounting.

The post BRKCRMSC-SRHOR appeared first on Alcons Audio.