Featuring the patented RBN202 pro-ribbon driver, the CRMSC combines a remarkable clarity and intelligibility, with a unusually high headroom SPL. The Alcons pro-ribbon drivers have up to 90% less distortion than any conventional mid/high transducer, while the very high peak power handling offers a 1:15 RMS-to-peak ratio, enabling maximum screen compensations without any audible stress on the driver.
The patented horizontal dispersion of the RBN202 extends the stereo-imaging to a larger number of seats in the auditorium; Due to the “compression-less” principle of the pro-ribbon transducer, the system has a linear response at any SPL.

Each CRMSCompact system consists of a separate mid-high frequency section, featuring one RBN202 2” pro-ribbon driver HF with non-vented 6.5” midrange and vented 12” low frequency section with low power-compression 4” voice-coil design.

A matching surround system with identical MF/HF components is available, for perfect screen/surround blending, resulting in a very uniform sound stage.

For full system performance, the CRMSC is to be driven by either one or two channels of ALC controller-amplifier, delivering maximum sound quality and utmost operation reliability. The 4 ohms system impedance offers maximum amplifier efficiency.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRMSC and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

The combination of the outstanding sound reproduction quality and the digital dynamics capability, make the system the ideal choice for high-end mix/screening rooms, post-production facilities, dubbing stages and quality-conscious Home Cinemas with a room depth less than 10m/30ft.

As a result of Alcons’ tight manufacturing standards, all system cabinets are within “matched pair” tolerance.

The post CRMSCompact appeared first on Alcons Audio.

The CRMSC-SR system consists of one RBN202 pro-ribbon driver for HF and a vented 6.5” mid-bass for LF reproduction. The CRMSC-SR HF section has an 400W peak power input, enabling a 1:16 dynamic range with up to 90% less distortion from 1kHz. to beyond 20kHz.
The patented horizontal dispersion of the RBN202 offers a stable coverage to a larger number of seats in the auditorium; Due to the “compression-less” principle of the pro-ribbon transducer, the system has a linear response at any SPL.

The CRMSC-SR is designed as matching surround system for the CRMSC system: By utilizing identical MHF components, a perfect voicing matching between screen- and surround system is realized, resulting in an exceptionally wide and uniform sound stage throughout the entire listening area.

The 10-degree slanted enclosure baffle together with the optional grill and ACO™ color option, provides for easy, low profile wall mounting.

For full system performance, the CRMSC SR needs to be driven by an ALC controller-amplifier, delivering maximum sound quality with increased headroom and utmost operation reliability.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRMSC-SR and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

Typical applications include surround sound system for premium Home Cinemas, high-end mix/screening rooms, quality-conscious post-production facilities and dubbing stages. As a result of Alcons’ tight manufacturing standards, all system cabinets are within “matched pair” tolerance.

The post CRMSC-SR appeared first on Alcons Audio.

The CRMSC-SRIW system consists of an RBN202 pro-ribbon driver for HF and a vented 6.5” mid-bass for LF reproduction. The CRMSC-SRIW HF section has an 400 W peak power input, enabling a 1:16 dynamic range with up to 90% less distortion from 1 kHz to beyond 20 kHz.
The patented horizontal dispersion of the RBN202 offers a stable coverage to a larger number of seats in the auditorium; Due to the “compression-less” principle of the pro-ribbon transducer, the system has a linear response at any SPL.

The CRMSC-SRIW is designed as matching in-wall surround system for the CRMSC system: By utilizing identical MHF components, a perfect voicing matching between screen- and surround system is realized, resulting in an exceptionally wide and uniform sound stage throughout the entire listening area.

The ultra-shallow enclosure of 150 mm / 5.9-in provides for easy, low profile in-wall mounting.

For full system performance, the CRMSC-SRIW needs to be driven by an ALC controller-amplifier, delivering maximum sound quality with increased headroom and utmost operation reliability.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRMSC-SRIW and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

Typical applications include in-wall surround sound system for premium Home Cinemas, high-end mix/screening rooms, quality-conscious post-production facilities and dubbing stages. As a result of Alcons’ tight manufacturing standards, all system cabinets are within “matched pair” tolerance.

The post CRMSC-SRIW/90 appeared first on Alcons Audio.

Featuring the patented Alcons pro-ribbon driver technology, the CRMSC-SRIW/120 surround combines an exceptional clarity and intelligibility with an unusually high dynamic range, offering the most realistic linear sound reproduction possible at any SPL.

The CRMSC-SRIW/120 system consists of one RBN202 pro-ribbon driver for HF and a vented 6.5” mid-bass for LF reproduction; the HF section has a 500 W peak power input, enabling a 1:16 dynamic range with up to 90% less distortion from 1 kHz to beyond 20 kHz.

The patented 120-degrees and patent-pending 90-degrees dispersion up to the highest frequencies not only offers a very wide and coherent direct-field coverage, it also guarantees a consistent reflected diffuse-field.

By utilizing identical MHF components within the CRMSC range, a perfect voicing matching between each screen- and surround system is realized, resulting in an exceptionally wide and uniform sound stage throughout the entire listening area.

The revolvable RBN waveguide and ultra-shallow enclosure of 100 mm / 3.9-in provides for easy, low profile in-wall or on-wall mounting in typical “2-by-4” wall constructions. An optional grill and ACO™ color option is available as well.

For full system performance, the CRMSC-SRIW/120 needs to be driven by an ALC controller-amplifier, delivering maximum sound quality with increased headroom and utmost operation reliability.

The CRMSC-SRIW/120 is available with 4 or 8 ohms impedance, for maximum amplifier efficiency in serial-connected (5.1/7.1) or individually-amplified (immersive) surround systems.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRMSC-SRIW/120 and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

The CRMSC-SRIW/120 is developed as an ultra-compact reference main / screen system – or compact surround system in immersive sound-for-picture applications. It can also be used as full-range sound system in any installed audio application, where a very high quality sound reproduction with inconspicuous in-wall or on-wall mounting is required.

As a result of Alcons’ tight manufacturing standards, all system cabinets are within “matched pair” tolerance.

The post CRMSC-SRIW/120 appeared first on Alcons Audio.

The CRMSC-SRHV system consists of one RBN202 pro-ribbon driver for HF and a vented 6.5” mid-bass for LF reproduction. The CRMSC-SRHV/90 HF section has a 500 W peak power input, enabling a 1:16 dynamic range with up to 90% less distortion from 1 kHz to beyond 20 kHz.
The patent-pending (90-degrees) horizontal and patented (60-degrees) vertical dispersion offers a wide and consistent coverage to a larger number of seats in the auditorium; Due to the “compression-less” principle of the pro-ribbon transducer, the system has a linear response at any SPL.

The CRMSC-SRHV is designed as matching (height layer) surround system for the CRMSC system: By utilizing identical MHF components, a perfect voicing matching between screen- and surround system is realized, resulting in an exceptionally wide and uniform sound stage throughout the entire listening area.

The revolvable RBN waveguide and trapezoidal enclosure together with the optional grill and ACO™ color option, provides for easy, low profile wall or ceiling mounting.

For full system performance, the CRMSC-SRHV needs to be driven by an ALC controller-amplifier, delivering maximum sound quality with increased headroom and utmost operation reliability.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRMSC-SRHV and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

The CRMSC-SRHV system is available with 90° x 60° (“CRMSC-SRHV/90”) or 120° x 90° (“CRMSC-SRHV/120”) dispersion pattern.

Typical applications include surround sound system for premium Home Cinemas, high-end mix/screening rooms, quality-conscious post-production facilities and dubbing stages. As a result of Alcons’ tight manufacturing standards, all system cabinets are within “matched pair” tolerance.

The post CRMSC-SRHV/90 appeared first on Alcons Audio.

Featuring the patented Alcons pro-ribbon driver technology, the CRMSC-SRHV surround combines an exceptional clarity and intelligibility with an unusually high dynamic range, offering the most realistic sound reproduction possible.

The CRMSC-SRHV system consists of one RBN202 pro-ribbon driver for HF and a vented 6.5” mid-bass for LF reproduction. The CRMSC-SRHV/120 HF section has a 500 W peak power input, enabling a 1:16 dynamic range with up to 90% less distortion from 1 kHz to beyond 20 kHz.

The patented 120-degrees and patent-pending 90-degrees dispersion offers a very wide and consistent coverage to a larger number of seats in the auditorium; Due to the “compression-less” principle of the pro-ribbon transducer, the system has a linear response at any SPL.

The CRMSC-SRHV is designed as matching (height layer) surround system for the CRMSC system: By utilizing identical MHF components, a perfect voicing matching between screen- and surround system is realized, resulting in an exceptionally wide and uniform sound stage throughout the entire listening area.

The revolvable RBN waveguide and trapezoidal enclosure together with the optional grill and ACO™ color option, provides for easy, low profile wall or ceiling mounting.

For full system performance, the CRMSC-SRHV needs to be driven by an ALC controller-amplifier, delivering maximum sound quality with increased headroom and utmost operation reliability.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRMSC-SRHV and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

The CRMSC-SRHV system is available with 90° x 60° (“CRMSC-SRHV/90”) or 120° x 90° (“CRMSC-SRHV/120”) dispersion pattern.

Typical applications include surround sound system for premium Home Cinemas, high-end mix/screening rooms, quality-conscious post-production facilities and dubbing stages. As a result of Alcons’ tight manufacturing standards, all system cabinets are within “matched pair” tolerance.

The post CRMSC-SRHV/120 appeared first on Alcons Audio.

Featuring the patented RBN401 pro-ribbon driver, the CRMS combines a remarkable clarity and intelligibility, with a unusually high headroom SPL. The Alcons pro-ribbon drivers have up to 90% less distortion than any conventional mid/high transducer, while the very high peak power handling offers a 1:16 RMS-to-peak ratio, enabling maximum screen compensations without any audible stress on the driver.
The patented horizontal dispersion of the RBN401 extends the stereo-imaging to a larger number of seats in the auditorium; Due to the “compression-less” principle of the pro-ribbon transducer, the system has a linear response at any SPL.

Each CRMS system consists of a separate mid-high frequency section, featuring one RBN401 4” pro-ribbon driver HF with non-vented 8” MF and vented 15” low frequency section with low power-compression 4” voice-coil design.

A matching surround system with identical MF/HF components is available, for perfect screen/surround blending, resulting in a very uniform sound stage.

For full system performance, the bi-amped CRMS is to be driven by two channels of ALC controller-amplifier, delivering maximum sound quality and utmost operation reliability. The 4 ohms system impedance offers maximum amplifier efficiency.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRMS and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

The combination of the outstanding sound reproduction quality and the digital dynamics capability, make the system the ideal choice for high-end mix/screening rooms, post-production facilities, dubbing stages and quality-conscious Home Cinemas with a room depth less than 20m/60ft.

As a result of Alcons’ tight manufacturing standards, all system cabinets are within “matched pair” tolerance.

The post CRMSmkII appeared first on Alcons Audio.

The CRMS SR system consists of one RBN401 pro-ribbon driver for HF and a vented 8” mid-bass for LF reproduction. The CRMS SR HF section has an 800 W peak power input, enabling a 1:16 dynamic range with up to 90% less distortion from 1 kHz. to beyond 20 kHz.
The patented horizontal dispersion of the RBN401 offers a stable coverage to a larger number of seats in the auditorium; Due to the “compression-less” principle of the pro-ribbon transducer, the system has a linear response at any SPL.

The CRMS SR is designed as matching surround system for the CRMS system: By utilizing identical MHF components, a perfect voicing matching between screen- and surround system is realized, resulting in an exceptionally wide and uniform sound stage throughout the entire listening area.

The 10-degree slanted enclosure baffle together with the optional grill and ACO™ color option, provides for easy, low profile wall mounting.

For full system performance, the CRMS SR needs to be driven by an ALC controller-amplifier, delivering maximum sound quality with increased headroom and utmost operation reliability.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRMS SR and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

Typical applications include surround sound system for premium Home Cinemas, high-end mix/screening rooms, quality-conscious post-production facilities and dubbing stages. As a result of Alcons’ tight manufacturing standards, all system cabinets are within “matched pair” tolerance.

The post CRMS-SR appeared first on Alcons Audio.

Featuring the patented Alcons pro-ribbon driver technology, the CRMS-SRIW combines an exceptional clarity and intelligibility with an unusually high dynamic range, offering the most realistic sound reproduction possible.

The CRMS-SRIW/9040 system consists of one RBN401 pro-ribbon driver for HF and a vented 8” mid-bass for LF reproduction; the HF section has an 800 W peak power input, enabling a 1:15 dynamic range with up to 90% less distortion from 1 kHz to beyond 20 kHz.

The RBN401’s patented 90-degrees dispersion up to the highest frequencies not only offers a very wide and coherent direct-field coverage, it also guarantees a consistent reflected diffuse-field. In combination with the revolvable RBN waveguide, this dramatically enhances the depth and width stereo imaging.

Due to the “compression-less” principle of the pro-ribbon transducer, the system has a linear response at any SPL.

The shallow enclosure of 150mm/5.9-in provides for easy, low profile in- or on-wall mounting in typical “2-by-6” wall constructions. An optional grill and ACO™ color option is available as well.

For full system performance, the CRMS-SRIW needs to be driven by an ALC controller-amplifier, delivering maximum sound quality with increased headroom and utmost operation reliability. The system is available in 8 ohms and 4 ohms version, for maximum amplifier efficiency in individually-amplified immersive surround systems.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRMS-SRIW and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

The CRMS-SRIW/9040 is developed as a compact reference main / screen system – or as larger surround system in immersive sound-for-picture applications. It can also be used as full-range sound system in any installed audio application, where a very high quality sound reproduction with inconspicuous mounting is required.

The CRMS-SRIW system is available with 90° x 40° (CRMS-SRIW/9040) or 90° x 90° (CRMS-SRIW/9090) dispersion pattern.

The post CRMS-SRIW/9040 appeared first on Alcons Audio.

Featuring the patented Alcons pro-ribbon driver technology, the CRMS-SRIW combines an exceptional clarity and intelligibility with an unusually high dynamic range, offering the most realistic sound reproduction possible.

The CRMS-SRIW/9090 system consists of one RBN401 pro-ribbon driver for HF and a vented 8” mid-bass for LF reproduction; the HF section has an 800 W peak power input, enabling a 1:15 dynamic range with up to 90% less distortion from 1 kHz to beyond 20 kHz.

The RBN401’s patented 90-degrees and patent-pending 90-degrees dispersion up to the highest frequencies not only offers a very wide and coherent direct-field coverage, it also guarantees a consistent reflected diffuse-field. This dramatically enhances the depth and width stereo imaging.

Due to the “compression-less” principle of the pro-ribbon transducer, the system has a linear response at any SPL.

The shallow enclosure of 150mm/5.9-in provides for easy, low profile in-wall or ceiling mounting in typical “2-by-6” wall/ceiling constructions. An optional grill and ACO™ color option is available as well.

For full system performance, the CRMS-SRIW needs to be driven by an ALC controller-amplifier, delivering maximum sound quality with increased headroom and utmost operation reliability. The system is available in 8 ohms and 4 ohms version, for maximum amplifier efficiency in individually-amplified immersive surround systems.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRMS-SRIW and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

The CRMS-SRIW/9090 is developed as a compact reference main / screen system – or as larger surround system in immersive sound-for-picture applications. It can also be used as full-range sound system in any installed audio application, where a very high quality sound reproduction with inconspicuous mounting is required.

The CRMS-SRIW system is available with 90° x 40° (“CRMS-SRIW/9040”) or 90° x 90° (“CRMS-SRIW/9090”) dispersion pattern.

The post CRMS-SRIW/9090 appeared first on Alcons Audio.