Featuring the patented Alcons pro-ribbon driver technology, the CR1 offers a 1:1 reproduction of the original sound source; The absence of a “compression threshold”, caters for the same tonal balance at all SPL’s, while the combination of unprecedented low distortion with a very high 1:15 RMS-to-peak dynamic range delivers the most realistic cinematic experience possible.

The patented “Real-90” horizontal dispersion of the RBN401 pro-ribbon, mounted on a revolvable waveguide, widens the stereo experience “sweet-spot” for the off-axis seated audience significantly.

Besides the RBN401, the CR1 comprises a 6.5” vented mid-range and 12” woofer, all with Neodymium motor structures enabling a light weight and compact cabinet design. The unique ultra-shallow enclosure design of only 18cm/7-in. provides for very flexible mounting in even the smallest spaces behind the screen or as surround; Both for on-wall, or in-wall mounting, for which the CR1 is available with front-vented LF (FV).

The low system impedance and fully passive-filtering configuration allows for a very economical power package, where the CR1 is powered and controlled by one channel of an ALC amplified loudspeaker controller; Through the integrated CR1 drive-processing, the ALC offers response optimisation and dedicated protection.

Through the SIS™ (Signal Integrity Sensing) circuit, the cable-length and connector resistance between the CR1 and ALC is completely compensated (system damping factor >10.000), for further increased accuracy and controlled cone-travel, resulting in a tighter mid and bass response.

The post CR1 appeared first on Alcons Audio.

Featuring the patented Alcons pro-ribbon driver technology, the CR2 offers a 1:1 reproduction of the original sound source; The absence of a “compression threshold”, caters for the same tonal balance at all SPL’s, while the combination of unprecedented low distortion with a very high 1:15 RMS-to-peak dynamic range delivers the most realistic cinematic experience possible.

The patented “Real-90” horizontal dispersion of the RBN601 pro-ribbon, mounted on a revolvable waveguide, widens the stereo experience “sweet-spot” for the off-axis seated audience significantly

The CR2 comprises in addition double 8” mid-bass for MF and a 15” woofer for LF reproduction. The ultra-shallow enclosure design of only 18cm/7-in. provides for very flexible mounting in even the smallest spaces behind the screen or as surround; Both for on-wall, or in-wall mounting, for which the CR2 is available with front-vented LF (FV).

The low system impedance and fully passive-filtering configuration allows for a very economical power package, where the CR2 is powered and controlled by one channel of an ALC amplified loudspeaker controller; For maximum output, the CR2 is also available in bi-amp configuration. Through the integrated drive-processing, the ALC offers response optimisation and dedicated protection.

Through the SIS™ (Signal Integrity Sensing) circuit, the cable-length and connector resistance between the CR2 and ALC is completely compensated (system damping factor >10.000), for further increased accuracy and controlled cone-travel, resulting in a tighter mid and bass response.

The post CR2 appeared first on Alcons Audio.

The CR3 offers the most realistic sound reproduction possible, for applications where high output with maximum quality cinema sound reproduction is required. It is recommended for theatres up to 350 seats (indicative).

The driver arrangement consists of a double RBN401 pro-ribbon HF driver array, two 6.5″ mid-range drivers and two vented 15″ woofers for LF reproduction. The CR3 HF section has a 1600W peak power input, enabling a 1:16 dynamic range with up to 90% less distortion from 1kHz. to beyond 20kHz.
The absence of a “compression threshold”, caters for the same tonal balance at all SPL’s, while the patented “Real-90″ horizontal dispersion of the RBN401 pro-ribbon guarantees a very stable sound field throughout the operating bandwidth, widening the stereo experience for far left and right seated audience.
For optimized projection, while minimizing operational system depth, the MF/HF waveguide features a 10º pre-tilt.

The multiple driver arrangement caters for a controlled sound projection while enabling a very shallow system design: The shallow enclosure measures a depth of only 35cm/13,7” providing for flexible mounting, claiming only a minimum of space behind the screen.

The CR3 is available with bi-amp filtering for economical powering or tri-amp filtering for maximum system output.

The CR3 is powered and controlled by the ALC amplified loudspeaker controller; Through the integrated CR3 drive-processing, the ALC offers response optimisation and dedicated protection.

Through the SIS™ (Signal Integrity Sensing) circuit, the cable-length and connector resistance between the CR3 and ALC is completely compensated (system damping factor >10.000), for further increased accuracy and controlled cone-travel, resulting in a tighter mid and bass response.

The post CR3 appeared first on Alcons Audio.

By implementing line-source technology throughout the entire system (an industry first), the normal (-6dB step) reduction of SPL coverage from front to rear is reduced; this “proximity” effect dramatically improves the cinema experience for the audience further away from the screen. The precise projection also prevents unwanted ceiling reflections.

The CR4 HF section has a 2400W peak power input, offering a 1:16 dynamic range with up to 90% less distortion from 1kHz. to beyond 20kHz. The patented Real-90 horizontal dispersion widens the stereo experience for far left and right seated audience.

The CR4 is available with bi-amp filtering for economical powering or tri-amp filtering for maximum system output.

The SignalIntegritySensing™ pre-wiring ensures complete (long!) cable/connector compensation between CR4 and ALC, significantly increasing response accuracy and further reducing distortion. The (industry’s most) shallow enclosure design of only 35cm/13,7” provides for flexible mounting, claiming only a minimum of space behind the screen.

For full system performance, it is strongly recommend using the CR4 in combination with an ALC amplified loudspeaker controller. Driven by the ALC, the CR4 delivers maximum sound quality with increased headroom under dedicated equalisation and inaudible (power and excursion) protection.

The post CR4 appeared first on Alcons Audio.

Featuring two patented RBN401 pro-ribbon drivers, the CRA24 combines a remarkable clarity and intelligibility, with a “non-compressed” linear response at any SPL. With up to 90% less distortion and  a very high 1600W peak power handling, the HF section allows maximum screen compensation without any audible stress on the driver.
The patented horizontal dispersion extends the stereo-imaging to a larger number of seats in the auditorium.

By implementing line-source technology throughout the entire system, a flat SPL coverage from front to rear is realized, with the “proximity” effect dramatically improving the cinema experience for the audience further away from the screen. The precise projection also minimizes unwanted acoustical reflections.

The CRA24N driver arrangement consists of a double RBN401 pro-ribbon HF driver array, two vented 6.5” mid-range drivers and two vented 12” woofers with 3” voice-coil design for LF reproduction.

The shallow enclosure design of only 32,4 cm/12.8-in. provides for flexible mounting, claiming only a minimum of space for even a complete array!

The Cinemarray™ system is powered by an ALC Sentinel amplifier loudspeaker controller, offering system dedicated processing, optimisation and protection in factory presets for maximum sound quality and utmost operation reliability..

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRA24N and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

The CRA24 comes in three versions: the CRA24N (“narrow”) has a smaller vertical projection pattern for the seats further away, whereas the CRA24W (“wide”) features a wider vertical coverage pattern for the seats closer to the screen, serving as single under-fill of an CRA24N array; The CRA24WX (“wide extended”) is the CRA24W, but with extended curving capability, enabling assembly of multiple CRA24WX in an array.

The post CRA24N Cinemarray™ appeared first on Alcons Audio.

Featuring two patented RBN401 pro-ribbon drivers, the CRA24 combines a remarkable clarity and intelligibility, with a “non-compressed” linear response at any SPL. With up to 90% less distortion and  a very high 1600W peak power handling, the HF section allows maximum screen compensation without any audible stress on the driver.
The patented horizontal dispersion extends the stereo-imaging to a larger number of seats in the auditorium.

By implementing line-source technology throughout the entire system, a flat SPL coverage from front to rear is realized, with the “proximity” effect dramatically improving the cinema experience for the audience further away from the screen. The precise projection also minimizes unwanted acoustical reflections.

The CRA24W driver arrangement consists of a double RBN401 pro-ribbon HF driver array, two vented 6.5” mid-range drivers and two vented 12” woofers with 3” voice-coil design for LF reproduction.

The shallow enclosure design of only 31,7 cm/12.5-in. provides for flexible mounting, claiming only a minimum of space for even a complete array!

The Cinemarray™ system is powered by an ALC Sentinel amplifier loudspeaker controller, offering system dedicated processing, optimisation and protection in factory presets for maximum sound quality and utmost operation reliability..

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRA24W and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

The CRA24 comes in three versions: the CRA24N (“narrow”) has a smaller vertical projection pattern for the seats further away, whereas the CRA24W (“wide”) features a wider vertical coverage pattern for the seats closer to the screen, serving as single under-fill of an CRA24N array; The CRA24WX (“wide extended”) is the CRA24W, but with extended curving capability, enabling assembly of multiple CRA24WX in one array.

The CRA24W is available with 90-degrees and 120-degrees horizontal dispersion (as CRA24W/90 and CRA24W/120).

The post CRA24W Cinemarray™ appeared first on Alcons Audio.

Featuring two patented RBN401 pro-ribbon drivers, the CRA24 combines a remarkable clarity and intelligibility, with a “non-compressed” linear response at any SPL. With up to 90% less distortion and  a very high 1600W peak power handling, the HF section allows maximum screen compensation without any audible stress on the driver.

The patented horizontal dispersion extends the stereo-imaging to a larger number of seats in the auditorium.

By implementing line-source technology throughout the entire system, a flat SPL coverage from front to rear is realized, with the “proximity” effect dramatically improving the cinema experience for the audience further away from the screen. The precise projection also minimizes unwanted acoustical reflections.

The CRA24WX driver arrangement consists of a double RBN401 pro-ribbon HF driver array, two vented 6.5” mid-range drivers and two vented 12” woofers with 3” voice-coil design for LF reproduction.

The enclosure design enables assembly of wide vertical coverage arrays (multiple CRA24WX only), or as under-fill in mixed arrays (CRA24WX under CRA24N array).

The Cinemarray™ system is powered by an ALC Sentinel amplifier loudspeaker controller, offering system dedicated processing, optimisation and protection in factory presets for maximum sound quality and utmost operation reliability..

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRA24WX and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

The CRA24 comes in three versions: the CRA24N (“narrow”) has a smaller vertical projection pattern for the seats further away, whereas the CRA24W (“wide”) features a wider vertical coverage pattern for the seats closer to the screen, serving as single under-fill of an CRA24N array; The CRA24WX (“wide extended”) is the CRA24W, but with extended curving capability, enabling assembly of multiple CRA24WX in one array.

The CRA24WX is available with 90-degrees and 120-degrees horizontal dispersion (as CRA24WX/90 and CRA24WX/120).

The post CRA24WX Cinemarray™ appeared first on Alcons Audio.

Featuring three patented RBN401 pro-ribbon drivers, the CRA30 combines a remarkable clarity and intelligibility, with a “non-compressed” linear response at any SPL. With up to 90% less distortion and  a very high 2400W peak power handling, the HF section allows maximum screen compensation without any audible stress on the driver.
The patented horizontal dispersion extends the stereo-imaging to a larger number of seats in the auditorium.

By implementing line-source technology throughout the entire system, a flat SPL coverage from front to rear is realized, with the “proximity” effect dramatically improving the cinema experience for the audience further away from the screen. The precise projection also minimizes unwanted acoustical reflections.

The CRA30N driver arrangement consists of a triple RBN401 pro-ribbon HF driver array, three vented 6.5” mid-range drivers and two vented 15” woofers with 4” voice-coil design for LF reproduction.

The shallow enclosure design of only 36,8cm/14.5-in provides for flexible mounting, claiming only a minimum of space for even a complete array!

The Cinemarray™ system is powered by an ALC Sentinel amplifier loudspeaker controller, offering system dedicated processing, optimisation and protection in factory presets for maximum sound quality and utmost operation reliability.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRA30N and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

The CRA30 comes in two versions: Both fitted with the same speaker configuration, the CRA30N (“narrow”) has a smaller vertical projection pattern for the seats further away, whereas the CRA30W (“wide”) features a wider vertical coverage pattern for the seats closer to the screen.

The post CRA30N Cinemarray™ appeared first on Alcons Audio.

Featuring three patented RBN401 pro-ribbon drivers, the CRA30 combines a remarkable clarity and intelligibility, with a “non-compressed” linear response at any SPL. With up to 90% less distortion and  a very high 2400W peak power handling, the HF section allows maximum screen compensation without any audible stress on the driver.
The patented horizontal dispersion extends the stereo-imaging to a larger number of seats in the auditorium.

By implementing line-source technology throughout the entire system, a flat SPL coverage from front to rear is realized, with the “proximity” effect dramatically improving the cinema experience for the audience further away from the screen. The precise projection also minimizes unwanted acoustical reflections.

The CRA30W driver arrangement consists of a triple RBN401 pro-ribbon HF driver array, three vented 6.5” mid-range drivers and two vented 15” woofers with 4” voice-coil design for LF reproduction.

The shallow enclosure design of only 34,8cm/13,7-in. provides for flexible mounting, claiming only a minimum of space for even a complete array!

The Cinemarray™ system is powered by an ALC Sentinel amplifier loudspeaker controller, offering system dedicated processing, optimisation and protection in factory presets for maximum sound quality and utmost operation reliability.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRA30W and ALC, significantly increasing response accuracy, regardless of cable length and system impedance, with tight and accurate mid and bass response as result.

The CRA30 comes in two versions: Both fitted with the same speaker configuration, the CRA30N (“narrow”) has a smaller vertical projection pattern for the seats further away, whereas the CRA30W (“wide”) features a wider vertical coverage pattern for the seats closer to the screen.

The post CRA30W Cinemarray™ appeared first on Alcons Audio.

A high-quality passive 2-way crossover network matches the two components, allowing 165W of continuous (AES) power input, making the CCS6 deliver exceptional performance from a very compact sized system.

The coaxial speaker arrangement creates a true point-source catering for a very smooth LF/HF blending in all directions, both on-axis as well as off-axis. This is an ideal solution in ceiling-mounted surround applications.

The 15-degree slanted baffle design (CCS6) provides for a low profile in wall mounted applications.
The enclosure design matches the Alcons surround aesthetics. Even in an assembled surround configuration of different systems, there’s a consistent, unobtrusive appearance.

The CCS6 is also available with a straight, non-slanted ultra-shallow cabinet for ceiling-mounted applications (or when pre-tilt is not required) as CCS6S, with absolute minimal mounting depth.

Multiple options are provided for ceiling and wall mounting; The CCS6 can be wall-mounted with the BRKCS6 tilt U-bracket or wall- and ceiling mounted with most commonly-applied brackets.

For full system performance, CCS6 is to be used in combination with an ALC amplified controller. Driven by the ALC, the CCS6 delivers maximum sound quality and output power with inaudible (power and excursion) protection .

The post CCS6 appeared first on Alcons Audio.