The SIS pre-wiring ensures complete cable/connector compensation between the TS3 and ALC. The enclosure design provides for low profile mounting (ceiling, wall). Typical applications for the TS3 include background system for medium installations (theatre, A/V, PA) or fill/delay/surround speaker in medium sized systems. In applications where extended bass response is required, the TS3 can be combined with a bass or sub bass system.

For full system performance, TS3 is to be used in combination with an ALC amplified loudspeaker controller. Driven by the ALC, the TS3 delivers maximum sound quality and output power with inaudible (power and excursion) protection.

The post TS3 appeared first on Alcons Audio.

The SIS pre-wiring ensures complete cable/connector compensation between the TS7 and ALC. The enclosure design provides for low profile mounting (ceiling, wall). Typical applications for the TS7 include nearfield main system for small theatre, A/V, PA or fill/delay speaker in larger systems. In applications where extended bass response is required, the TS7 can be combined with a bass or sub bass system.

For full system performance, TS7 can be used in combination with an ALC amplified loudspeaker controller. Driven by the ALC, the TS7 delivers maximum sound quality and output power with inaudible (power and excursion) protection.

The post TS7 appeared first on Alcons Audio.

Featuring a single RBN1801 pro-ribbon driver (patents pending), the QR18 offers Real-90 horizontal dispersion with seamless coverage; Its transient response and high peak power handling enable an amazing intelligibility and throw.

The 91% active frontal radiation, in combination with the pro-ribbon’s all-natural cylindrical flat (Isophasic) wavefront, brings maximum “gain-before-feedback” up to directly in front of / under the cabinet.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the QR18 and ALC. In this way, the ALC can be loaded down to 2 ohms, without any sacrifice on response quality (4 units QR18 parallel on one channel loads 3 ohms).

The system includes dedicated filtering, but system equalizing is done remotely (electronically) fully utilizing the individual speaker components’ power capacity; In combination with the unusual high peak power handling (3000W/200mS), this results in a virtually infinite headroom SPL from 1kHz. up.

Typical applications for the QR-systems include main system for theatre, PA system in “acoustically challenging rooms”, as well as high power side-fill stage monitoring.

For full system performance, the QR18 needs to be driven by an ALC amplified loudspeaker controller. Driven by the ALC, the QR18 delivers maximum sound quality with inaudible (power and excursion) protection.

The post QR18 appeared first on Alcons Audio.

The QM18 “array in-fill” module is applied in a multiple QR-array, where the direct HF reproduction/projection of a QR is not required, but where an uninterrupted LMF line-source array is desirable for extended frequency control. The tightly spaced mid-bass transducers are fully compliant with the laws of line-array behaviour. The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the QM18 and ALC. In this way, the ALC can be loaded down to 2 ohms, without any sacrifice on response quality (4 units QM18 parallel on one channel loads 3 ohms).

Typical applications for the QM-systems include “array in-fill” to a QR main system for theatre, PA system in “acoustically challenging rooms”, as well as high power side-fill stage monitoring.

For full system performance, the QM18 needs to be driven by an ALC amplified loudspeaker controller. Driven by the ALC, the QM18 delivers maximum sound quality with inaudible (power and excursion) protection.

The post QM18 appeared first on Alcons Audio.

As an “array of line-sources”, a QR system acts as true cylindrical radiator, offering a 3dB SPL drop-off per doubling of distance (in the “near-field” or “Fresnel-zone”). This brings significant advantages in SPL coverage and (intelligibility) throw, from a relatively simple system.

Featuring double RBN1801 pro-ribbon drivers (patents pending), the QR36 offers Real-90 horizontal dispersion with seamless coverage; Its transient response and high peak power handling enable an amazing intelligibility and throw.

The 91% active frontal radiation, in combination with the pro-ribbon’s all-natural cylindrical flat (Isophasic) wavefront, brings maximum “gain-before- feedback” up to directly in front of / under the cabinet.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the QR36 and ALC. In this way, the ALC can be loaded down to 2 ohms, without any sacrifice on response quality (2 units QR36 parallel on one channel loads 3 ohms).

The system includes dedicated filtering, but system equalizing is done remotely (electronically) fully utilizing the individual speaker components’ power capacity; In combination with the unusual high peak power handling (6000W/200mS), this results in a virtually infinite headroom SPL from 1kHz.up.

Typical applications for the QR-systems include main system for theatre, PA system in “acoustically challenging rooms”, as well as high power side-fill stage monitoring.

For full system performance, the QR36 needs to be driven by an ALC amplified loudspeaker controller. Driven by the ALC, the QR36 delivers maximum sound quality with inaudible (power and excursion) protection.

The post QR36 appeared first on Alcons Audio.

The QM36 “array in-fill” module is applied in a multiple QR-array, where the direct HF reproduction/projection of a QR is not required, but where an uninterrupted LMF line-source array is desirable for extended frequency control. The tightly spaced mid-bass transducers are fully compliant with the laws of line-array behaviour. The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the QM36 and ALC. In this way, the ALC can be loaded down to 2 ohms, without any sacrifice on response quality (2 units QM36 parallel on one channel loads 3 ohms).

Typical applications for the QM-systems include “array in-fill” to a QR main system for theatre, PA system in “acoustically challenging rooms”, as well as high power side-fill stage monitoring.

For full system performance, the QM36 needs to be driven by an ALC controller-amplifier. Driven by the ALC, the QM36 delivers maximum sound quality with inaudible (power and excursion) protection.

The system includes dedicated filtering, but system equalizing is done remotely (electronically) fully utilizing the individual speaker components’ power capacity; In combination with the unusual high peak power handling (6000W/200mS), this results in a virtually infinite headroom SPL from 1kHz.up.

Typical applications for the QR-systems include main system for theatre, PA system in “acoustically challenging rooms”, as well as high power side-fill stage monitoring.

For full system performance, the QM36 needs to be driven by an ALC amplified loudspeaker controller. Driven by the ALC, the QM36 delivers maximum sound quality with inaudible (power and excursion) protection.

The post QM36 appeared first on Alcons Audio.

The SIS pre-wiring ensures complete cable/ connector compensation between the QB363 and ALC. Typical applications for the QB363 include bass extension of main QR sound systems, used in multiples depending on the application and low frequency output and control.

For full system performance, the QB363 is to be used in combination with an ALC amplified loudspeaker controller. Driven by the ALC, the QB363 delivers maximum sound quality and output power with dedicated and inaudible (power and excursion!) protection.

The post QB363 appeared first on Alcons Audio.

Special attention in the design was paid to creating a versatile (and therefore economic) system; The system can be scaled from (part of) a large-scale long-throw arena system to an ultra-compact single cabinet system, with its revolvable wave-guide.
Furthermore, its lowest usable frequency is 51Hz., making the system real full-range in most applications.

The SIS pre-wiring ensures complete cable/connector compensation between the LR16 and ALC. Typical applications for the LR16 include main system for theatre, A/V, PA or front-, in- and side-fill system.

In applications where extended bass response is required, the LR16 can be combined with the LR16B bass module or a deep-sub system (B-series).

For full system performance, we recommend using the LR16 in combination with an ALC amplified loudspeaker controller. Driven by the ALC, the LR16 delivers maximum sound quality with inaudible (power and excursion) protection.

The post LR16 appeared first on Alcons Audio.

The SIS pre-wiring ensures complete cable/connector compensation between the LR16Bass and ALC. The LR16Bass is designed as high-efficient bass extension of the LR16, used in multiples depending on the array-length and low frequency requirements.

For full system performance, we recommend using the LR16Bass in combination with an ALC amplified loudspeaker controller. Driven by the ALC, the LR16Bass delivers maximum sound quality and output power with dedicated and inaudible (power and excursion!) protection.

The post LR16B appeared first on Alcons Audio.

Despite the small size, the CSS3 delivers dynamic, uncoloured and very low-distortion sound reproduction, while the system voicing is specifically matched with Alcons’ pro-ribbon cinema sound systems.

The 16 ohms impedance enables an economical powering of up to 24 units (2.7 ohms) on an ALC amplified loudspeaker controller (4 channels driven). The system includes dedicated (passive) filtering and system equalizing.

The 15° slanted baffle together with the wide horizontal dispersion caters for a very smooth LF/HF blending, in installations where the surrounds are mounted closely to the audience. The CSS3 dedicated bracket enables optimized projection.

The enclosure design provides for low profile wall mounting, with the reflex vent located on the underside of the cabinet. The CSS3 comes with a flush-mount wall plate and has an optional swivel mounting (wall) bracket.

The CSS3 is powered and controlled by the ALC amplified loudspeaker controller,  offering CSS3-specific drive processing with response optimisation, dedicated power and excursion protection, guaranteeing maximized  performance with full system reliability and minimized maintenance.

For perfect interior blending, the CSS3 is available in any color, through the Architect Color Option (ACO™) program.

The post CSS3 appeared first on Alcons Audio.